Technical Details:

It has been designed for transducer mounting at a distance of 309 to 514 mm from the mounting point on the transom. The design consists of the covering transducer fastening (that includes two swivel brackets and radius washers), two telescopic tubes (20,4 mm, L — 240 mm; and Ø 16,2, L — 220 mm), a male adapter shaped as a 12 pointed star, a spring-loaded joint with 27.7° splines, that is equipped with 7.5° adapter washers, a spring and an M5*50 DIN 912 screw. The tilt position and rigidity of the joint is adjusted with a hex knob with the inserted M5 DIN 934 nut. The assembly also includes the fasteners: M6*30 and M5*40 DIN 912 screws, M5 DIN 985 and M6 DIN 985 self-locking nuts. The main parts are made of fiberglass-reinforced polyamide. The washers of the transducer mount — of polyurethane. The tube is made of anodized aluminium, fasteners — of A2 (AISI 304) stainless steel (except for an M5 DIN 934 brass nut).