Technical Details:

 It has been designed for installation of the transducer arm mount at a distance of 300 mm from the mounting point on the transom. The design includes the Ft300 transducer and the FMb mounting system. The design of the transducer consists of the transducer mount with an M6*50 DIN 931 bolt and a square knob nut, that is connected to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and tilt joint. The 27.7° main spline joint is equipped with 7.5° adapter washers, a spring and an M5*60 DIN 912 screw. The tilt position and rigidity of the joint is adjusted with a knob with the inserted M5 DIN 934 nut. Each of the mounts comprises a female adapter and is connected to the mounting pad with four 6,3*32 DIN 9200 self-tapping screws. It allows the kit to be fastened at the installation site. The kit also includes a hex wrench. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium, fasteners — of A2 (AISI 304) stainless steel.