Motor boats with a book floorboard of the LP Navigator series are represented by boats with a length of 2.4 to 3.2 meters.

Since 2017, the Navigator LP 270B inflatable boat with a book floorboard is equipped with anchor roller!

The design of the boats has a U-shaped cylinders with a glued transom made of waterproof plywood. Cylinders, depending on the length of the boat, are divided into 2-3 sealed compartments. The bottom is made flat, not keeled.

The patented shape of the boat, thanks to the all-sheet cutting of the fabric, has 4 circumferential and 2 longitudinal welds, which ensures high tightness of the cylinders and a wide cockpit.

The advantage of inflatable boats of the LP Navigator series

1) Longitudinal and circumferential seams are made by heat welding.

2) An enlarged cockpit is achieved by cutting the entire sheet of fabric.

3) The boats are assembled from high-quality Korean PVC with a density of 800 g/m2, which ensures their long-term operation, without additional care for the seams.

4) The advantage of the boats of the LPK Navigator series is considered to be a small draft, so you can freely swim in shallow water, where you can’t get on a regular boat.

5) The use of a book floorboard 9 mm thick gives additional rigidity and driving performance to the boat.

6) For comfortable accommodation of passengers in the boat, a movable seat support system is used.

Standard equipment of boats of the LP Navigator series

1) The welded frame of the cylinders is divided into 2-3 independent pressurized compartments.

2) Along the cylinders of the boat, a fender 9 cm wide with a wave baffle is glued.

3) A lifeline 8-10 mm thick is glued along the outer perimeter of the boat.

4) Type of the bottom – book floorboard (3, 4 sections) 9 mm thick, is a solid single structure, where the individual sections are interconnected with PVC tapes.

5) Reinforced stationary transom made of waterproof plywood 18 mm thick is glued into the aft part of the cylinders. The upper part of the transom is equipped with a protective lining, and in the lower part there is a drain valve.

6) For transporting the boat, 2 handles are used on the ends of the cylinders.

7) A universal eye-handle in the bow, made of durable plastic, is used to tow the vessel and anchor the boat.

8) An eye ring is used to fasten the anchor cable in the bow.

9) Two movable seats are easily adjustable along the entire length of the rails.

10) Two collapsible aluminium oars 1.4 meters long.

11) Foot boat pump for 6 litres.

12) PVC boat repair kit (PVC material, glue).

13) Operation manual.

14) Small craft certificate.

15) Packing bag for the boat – 1 pc.

16) Packing bag for a book floorboard – 1 pc.

17) Basic colours: green, dark grey, light grey.

18) A variant of the combined colour of the boat is possible !!!

Warranty for inflatable boats “Navigator” – 5 years, for PVC material – 3 years.