Application.

Designed for lowering and lifting anchors weighing up to 20 kg out of the water. The structure consists of a cast housing with 27.7° side slots, a locking system with a rope or belt release cord, a spring, a roller, and a reinforced as222-1 adapter in the form of a 12-angle star with double-sided side slots. The tilt joint is equipped with dp230 adjustment washers with 7.5° slots and an end washer. The tilt position is fixed with M6*50 DIN 931 Bolt and hex handle with M6 DIN 934 nut inserted. suitable for Halyard Ø up to 10 mm and belt width up to 35 mm and thickness up to 2.5 mm. The kit also includes fasteners: two M6*55 DIN 912 screws, two M6 DIN 985 self-mounting nuts. the adapter is equipped with an O-ring. The main parts are made of glass fiber reinforced polyamide. The Mount and spring are made of A2 grade stainless steel (with the exception of the M6 DIN 934 brass nut).Complete set: this is a reinforced holder model designed for use with anchors weighing up to 20 kg. Its special feature is the adapter reinforced with a steel plate, which allows the holder to easily withstand increased dynamic loads. Designed for lowering and lifting anchors on various types of watercraft. Suitable for halyards up to 10 mm and belts up to 35 mm wide and 2.5 mm thick. The inclined design is convenient for use on inflatable boats: the holder fixes the anchor overboard so that the rope does not touch the surface of the inflatable cylinder during lowering and lifting. The holder tilts 180° in 7.5°increments. The spring-loaded locking system automatically secures the anchor: just pull the rope to lift it out of the water. For easy descent, a halyard reset system is provided, which is triggered when the lace on the holder body is pulled. A convenient roller makes it easier for the belt or halyard to slide. The holder can be installed in any BORIKA FASTen® mounting system designed for heavy loads.glass fiber reinforced polyamide, A2 grade stainless steel.